Gas Piping Inspection Checklist — NYC Local Law 152
Periodic gas piping inspection checklist per NYC Local Law 152. Covers exposed gas piping conditions, connection integrity, leak detection, and GPS-2 filing documentation for DOB compliance.
General Information
- CheckboxRecord building address and BIN (Building Identification Number)
- CheckboxDocument building type and occupancy classification
- CheckboxRecord gas utility provider (Con Edison, National Grid)
- CheckboxIdentify number of gas meters and risers in building
- CheckboxNote Licensed Master Plumber name and license number performing inspection
Gas Meter and Entry Point
- CheckboxInspect gas meter for damage or corrosion
- CheckboxVerify gas meter valve is accessible and operable
- CheckboxCheck gas service entry point for proper sealing
- CheckboxInspect drip leg at meter for proper installation
- CheckboxVerify gas pressure at meter is within acceptable range
Exposed Gas Piping Condition
- CheckboxInspect all exposed gas piping from meter to appliance connections
- CheckboxCheck for corrosion, rust, or deterioration on pipe surfaces
- CheckboxVerify piping is properly supported with hangers and brackets
- CheckboxConfirm no piping is embedded in walls or concealed without proper protection
- CheckboxCheck for signs of unauthorized modifications or illegal connections
- CheckboxVerify piping material is approved (black steel, CSST where permitted)
Leak Detection
- CheckboxPerform combustible gas leak detection at all accessible connections
- CheckboxCheck threaded connections, unions, and valves for leaks
- CheckboxInspect flexible connectors for damage or deterioration
- CheckboxTest appliance shutoff valves for leaks
- CheckboxDocument any detected leaks with location and severity
- CheckboxReport any immediately hazardous conditions per DOB requirements
Appliance Connections
- CheckboxVerify each gas appliance has an individual shutoff valve
- CheckboxCheck flexible connectors for proper length and condition
- CheckboxConfirm appliance connectors are accessible and not concealed
- CheckboxVerify drip legs are installed at each appliance connection where required
- CheckboxDocument all connected gas appliances by type and location
GPS-2 Filing Documentation
- CheckboxComplete GPS-2 certification form with all required fields
- CheckboxRecord overall condition assessment (satisfactory or conditions found)
- CheckboxDocument all conditions found with descriptions and locations
- CheckboxClassify conditions as requiring corrective action or monitoring
- CheckboxAttach photos of any conditions or deficiencies found
- CheckboxFile GPS-2 with NYC DOB within required timeframe
Use This Checklist Digitally in KomplyOS
Complete inspections on your phone, capture photos, collect signatures, and generate professional reports automatically.
Contact UsRelated Templates
Boiler Inspection Checklist
Comprehensive annual boiler inspection checklist covering safety controls, combustion systems, pressure vessels, and operating conditions per NYC DOB requirements.
Fire Alarm System Inspection Checklist
Annual fire alarm inspection checklist covering initiating devices, notification appliances, control panels, and communication links per NFPA 72 and FDNY requirements.
Sprinkler System Inspection Checklist (NFPA 25)
Quarterly and annual sprinkler system inspection checklist covering control valves, water supply, sprinkler heads, piping, and flow testing per NFPA 25.